Harry Potter Unity Scarf Finished

Introducing the scarf that seemed like it would never end. It's inspired by the Harry Potter Unity Scarf that Neville Longbottom and other students wore during the "Goblet of Fire" movie. And, modeling this warm cozy scarf is my new duct tape "body double" dressform.



The "H" crest on one end is something I added. I love the colors and thickness of this scarf. I made it for my mom who should get some use out of it a t TRF camping this years. Looks like it might be a chilly fall/winter here.

I'm cross-posting this from my loom knitting blog if you want to see or read more about how it is constructed. The link is:

http://knitty-witty.blogspot.com/2009/10/hp-unity-scarf-finally-finished.html

Until next time!

The Body Double - Duct Tape Dressform

Recently, I was inspired to try making a duct tape dress form "loosely" following instructions found here:

http://www.threadsmagazine.com/item/3659/clone-yourself-a-fitting-assistant

So, less than $15 later, I have a new custom dressform with adjustable height! To find out more about how I did it, read on below.





When I say "loosely" followed the instruction, I mean that I did a LOT of substitution. But, I am pretty happy with the results. If I gave it another go, I know it would be even better.

• I started with the old t-shirt and added a pair of shorts to make it a bit longer. They suggest that you use cling wrap on exposed parts, but I didn't have any. But, I recommend using it to get a longer arm and lower hips.


• Most of my investment went into the duct tape. I used TEN rolls of the cheap stuff at $1 a pop that barely covered me in two layers! I don't suggest scrimping on the tape.


• I used a heavy duty coat hanger that I already had to support the shoulders and an adjustable shower rod for the pole, which is great. I taped the hanger to the pole with more duct tape. I can readjust the height of my dress form to hem dresses/skirts allowing for wearing heels or no heels. It also turns really easy. Leaving the hanger hook on will allow me to remove the base, shorten the pole and hang it out of sight in the closet. Marking the pole with permanent marker, tape or a scratch will help in resetting the height correctly.
  


• I stuffed my form with plastic grocery bags. We always have a ton of these around. I try to find uses for them, but never seem to keep up with them. I never remember to bring my own bags shopping with me. And, the cashier never seems to listen when I tell them the bag can hold more. :) Anyway, I managed to use up every bag in the house for this project! But, I did stuff it pretty tight.


• As recommended, I put a piece of cardboard in the bottom after stuffing and taped it on with more duct tape. It needs to have a hole cut in the center for the pole and be fairly the shape/size of your hips. I really believe this was the most difficult part of the project. :) For accuracy, the pole needs to be aligned through the form to mirror your posture when you stand.
  


• The base is a plastic Christmas tree stand that I bought at a thrift store for $1. I could have purchased a metal one, but we agreed that the plastic one looked better. I may spray it silver in the future. I was concerned it would be top heavy when finished, but the plastic bags didn't add much weight. So, with much relief, it stands pretty sturdy.


• I covered the finished form in tan polar fleece for taking photos. Which reminds me that I discovered pinning into the duct tape is NOT a good idea. The pins get all gummy. It works better to just pin into the fleece layer.
  

After all is finished, I would definitely recommend this project to those who like to sew or just make costumes in general. Its very useful, inexpensive to make and doesn't take a great deal of time to complete. I'm sure I will need to make a new one in a couple years, but I can pretty much reuse most of it, except for the duct tape.

Thanks for takin' a peek at my blog. In the near future I should hopefully be posting many new projects made using my new assistant.